Software Requirements (for Egan PowerX only)
- Microsoft® PowerPoint®: Versions 97, 2000, 2002(XP)
Connectivity Requirements**
- Serial Controller: COM Ports (9 Pin Serial Port)
- USB Controller: USB Port
|
Power Supply (for Serial Controllers only)
- Input Voltage: 100 - 240 Vac
- Input Frequency: 47 - 63Hz 0.4A
- Output Voltage: 9 Vdc
- Output Current: 200 mA
|
| WiFi
The TeamBoard WiFi has two hardware components, and no software components. Once these are installed, your Serial TeamBoard works normally, despite the fact that there is no physical connection between it and your computer.
The first physical component is the Receiver. This radio device connects to your computer’s serial port (for data communication), and to it’s USB port (for power). It has no other connections.
The other physical component is the Transmitter. This radio device connects to the Serial Adapter of your TeamBoard, and can be concealed behind your TeamBoard. It also has a power cord that must be plugged into an outlet.
When the hardware is connected as described, the TeamBoard controller sends data to the Transmitter, which broadcasts this information via radio signal. The Receiver receives this radio signal, and extracts the original TeamBoard data. It passes this data to the computer’s operating system, making it available to the TeamBoard software.
The default security configuration for the TeamBoard WiFi radios is without encryption (Open system). To use a standard 802.11b/WiFi WEP 64/128bit encryption scheme, please call Egan
TeamBoard Inc. |
